|
| |
NEW ITEM A Boxwood Block Plane 7 1/2 inches long. The iron is by Moulson Brothers and 2 inches wide. A handsome looking plane. Good++ $44.00
Stock/Part Number: FW12268
|
|
|
|
|
| |
A Rosewood Tool Handle by Springfield Tool & Level Co. Seven tools that store inside the handle. 7 1/2 inches long. (Similar to the Millers Falls No 4). Good++
Stock/Part Number: FW12202
|
|
|
|
|
| |
NEW ITEM A super Handled Compass Rabbit Plane by C. Nurse, with a boxwood adjustable front to vary the radius. i 1/2 inch cutter 9 1/2 inches long. Good++
Stock/Part Number: FW12265
|
|
|
|
|
| |
NEW ITEM A Stair Saw made from Walnut with nicely carved handle. Good++
Stock/Part Number: FW12243
|
|
|
|
|
| |
A Solid Boxwood Handled Screw Stem Plow Plane by Casey, Clark & Co. Auburn, NY. 1858 to 1864. Very nice looking plane with brass fittings in close to Fine condition. A few small checks in the wood typical of aged boxwood. FINE
Stock/Part Number: FW12153
|
|
|
|
|
| |
A Fully Boxed Wedge Stem Sash Fillester Plane with a solid boxwood fence by Edwards, Bays and Rye, Swindon. Good++
Stock/Part Number: FW12173
|
|
|
|
|
| |
A Set of 18 Hollow & Rounds by Rowell & Gibson, Albany, NY. Great patina all planes in excellent working order. Good++
Stock/Part Number: FW12211
|
|
|
|
|
| |
NEW ITEM 1/2 inch Round by Christopher Gabriel, 1770 to 1822. A fine example of an 18th Century plane. Christopher Gabriel was a plane maker in London. His earliest planes have flat chamfers on the shoulders, as this example does, but most are found with oval chamfers as found in the famous Seaton Chest. Christopher Gabriel died in 1809, his business which was quite diverse, was continued by his sons. Good++ $75.00
Stock/Part Number: FWASH1
|
|
|
|
|
| |
A 1/4 Inch Bead Plane by Carter, Syracuse, NY.
Stock/Part Number: FW12250
|
|
|
|
|
| |
NEW ITEM Table Joint Plane by Christopher Gabriel. 1770 to 1822. Another excellent early plane by Christopher Gabriel in Good++ condition. $75.00
Stock/Part Number: FWASH2
|
|
|
|
|
| |
NEW ITEM Sheffield Plated Brace. Beech wood with push button chuck. Nice brass neck with a Rosewood head. Good ++
Stock/Part Number: FW8429
|
|
|
|
|
| |
NEW ITEM Twin iron Complex Molding Plane by Mathieson. Irons are fine and good for using. Good ++
Stock/Part Number: FW10664
|
|
|
|
|
| |
NEW ITEM Twin iron Complex Molding Plane by Gleave. Cuts a Grecian Ogee profile. Irons are good for use. Good ++
Stock/Part Number: FW10048
|
|
|
|
|
| |
NEW ITEM Twin iron Complex Molding Plane by John Miller, Newcastle. Great for use with good irons. Good ++
Stock/Part Number: FW10768
|
|
|
|
|
| |
A Handled Screw Stem Plow Plane with brass fittings. Unmarked, probably user made from birch wood. Unusually long, 13 3/4 inches over all, with a 9 inch brass skate. Good++
Stock/Part Number: FW12258
|
|
|
|
|
| |
3/16 inch Beading Plane, fully boxed by C. W. Holden.
Stock/Part Number: FW12251
|
|
|
|
|
| |
A Pair of little used Table Joint Planes by C. R. Wells, who was a planemaker in New Haven, NY (1828 - 1856) Great condition for the collector or user. Fine
Stock/Part Number: FW12242
|
|
|
|
|
| |
A 3/8 inch Boxed Center Beading Plane by William Ward 513 8th Ave. NY. Good++
Stock/Part Number: FW12176
|
|
|
|
|
| |
A Complex Molding Plane, Quirk, Ogee with Bevel by Biddle & Co./A. E. Baldwin. 1/2 inch. Good++
Stock/Part Number: FW12165
|
|
|
|
|
| |
A Complex Molding Plane, Quirk, Ogee with Bevel by E. W. Pennell, Philad. Marked on the heel, INCH & 1/4 BY 1/2. Good++
Stock/Part Number: FW12164
|
|
|
|
|
| |
A Complex Molding Plane by J Dryburgh, NE Hope, Ontario, CA. Cutting iron by Spear & Jackson a well known English saw maker. Some checks in the wood. Good
Stock/Part Number: FW12152
|
|
|
|
|
| |
A Magnificent 18th Century Yellow Birch Bead Plane by Joe Fuller, marked "Jo, Fuller" "Providence". 10 inches long. Born in 1746, and died in 1822. Fuller worked in Providence, RI, and was one of the most important and prolific of the early planemakers. Good++
Stock/Part Number: FW12139
|
|
|
|
|
| |
A Rare manufactured Spill Plane by Kirk & Asling, Nottingham, England. Manufactured between 1885 and 1889. Good+
Stock/Part Number: FW12090
|
|
|
|
|
| |
A Quirk, Ogee and Bevel Complex Molding Plane by Brown and Barnard, C1800 to 1803. Marked 5/8 on the heel plus owners name. Good+
Stock/Part Number: FW12128
|
|
|
|
|
| |
A Quirk, Ogee and Bevel Complex Molding Plane by Gough and Bowen, London. C1840 to 1855. Good++
Stock/Part Number: FW12129
|
|
|
|
|
| |
A Coachmaker's Compass Hollow Plane by T. Turner, Sheffield. Good++
Stock/Part Number: FW12095
|
|
|
|
|
| |
A Small 4 inch Compass Rebate Plane by S. H. Wright. Good++
Stock/Part Number: FW12102
|
|
|
|
|
| |
A Pair of 7/8 inch Boxed Beading Planes by Griffiths of Norwich, also stamped: G. Collier, Cornwall Rd, Brixton. Collier had a retail store which sold many tools made by Griffiths in the early 1900s. Good++
Stock/Part Number: FW12039D
|
|
|
|
|
| |
A Coachmaker's Compass Quarter Round Plane, marked with user name H. Davis. Good++
Stock/Part Number: FW12096
|
|
|
|
|
| |
A Planking Plane by Greenfield Tool Co. Greenfield, Mass. No 13. Used to put a 5/16 inch Tongue on the edge of a board of varios thickness. Cutting iron by Dwights French Co. Good++
Stock/Part Number: FW12115
|
|
|
|
|
| |
A Beech Handled Pad Saw with brass securing and stabaling screw. C1900 Good++
Stock/Part Number: FW12098
|
|
|
|
|
| |
A 5/8 inch Boxed Beading Plane by Griffiths of Norwich. Good +
Stock/Part Number: FW12039B
|
|
|
|
|
| |
A 3/8 inch Grooving Plane by Arthur, Edinburgh. Good+
Stock/Part Number: FW112050
|
|
|
|
|
| |
A Complex Molding Plane by Varvill & Sons, York. Quirk Ogee with bevel marked No 5 on the heel in excellent condition. Good++
Stock/Part Number: FW12025
|
|
|
|
|
| |
A 5/8 inch Bead Plane by D. Malloch & Son, Perth. Some slight staining on the wood, otherwise Good++
Stock/Part Number: FW8995
|
|
|
|
|
| |
A 5/8 inch Beading Plane by Edward Preston. A great user plane or for a collector missing the 5/8 inch size in his collection of beads by Edward preston. Good+
Stock/Part Number: FW11963
|
|
|
|
|
| |
A Beech Bow Saw by S. Tyzack & Son Ltd. Railway Arch, 345 Old Street, EC1, London. All original, 9 inch saw. Good++
Stock/Part Number: FW11801
|
|
|
|
|
| |
An Ogee Shaped Stair Rail Shave with pretty scroll wedge. Beech wood, craftsman made with a nice patina. A couple of small shakes in the wood. Good+
Stock/Part Number: FW11845
|
|
|
|
|
| |
An Ogee Molding Plane by A. Mathieson, Glasgow. Marked No 36, 5/8 inch. Good+
Stock/Part Number: FW8980
|
|
|
|
|
| |
A Pair of Side Rebate Planes by Preston, used for trimming up the sides of rebates or grooves. Ready to use in Good++ condition.
Stock/Part Number: FW10360
|
|
|
|
|
| |
Another very nice Complex Molding Plane by J. Wood. Good++
Stock/Part Number: FW10897
|
|
|
|
|
| |
A very nice Complex Molding Plane by H. Brown. Cuts a Quirk, Ovolo and Astragal molding. Good++
Stock/Part Number: FW10077
|
|
|
|
|
| |
A 1 1/2 inch Dado Plane with double knickers by JF & CM Lindsey, Mass. Skewed iron. A super plane in super condition. Good++
Stock/Part Number: FW10988
|
|
|
|
|
| |
A pretty Lignum Vitae Compass Plane with Boxwood Adjustable Front. A users name is stamped in the wood on the front. The iron is by Pearson & Co. A great looking plane in exotic wood. Good++
Stock/Part Number: FW11044
|
|
|
|
|
| |
An All Boxwood Handled Plow Plane by J. Kellogg, Springfield, Mass. with a set of 8 irons by Gleave. A very minor thread flake which would detract from the use of the plane. An excellent tool in Good++ condition.
Stock/Part Number: FW11101
|
|
|
|
|
| |
An excellent Draw Bottom Plane by J. Dobie, Glasgow, 1862. 7 1/2 inches long with an adjustable fence. Good+
Stock/Part Number: *
|
|
|
|
|
| |
Boxwood and Birch are used in this Sliding Box Chamfer Plane with a nice scroll wedge, by J. Malkin. Brass fittings. Dark stain on corner as shown in the picture. Good++
Stock/Part Number: *
|
|
|
|
|
| |
A super Beech Handrail Plane. with adjustable fence. Owners name stamped in the wood. Good++
Stock/Part Number: FW11110
|
|
|
|
|
| |
A Complex Molding Plane. Unusually marked on the toe of the plane - No 143 1/2 inch. No makers name. Cuts a quirk ovolo with fillet. Good++
Stock/Part Number: FW11207
|
|
|
|
|
| |
A Quirk Ovolo with Bead Molding Plane, marked No 8 on the heel of the plane, by Ponder, London. Good++
Stock/Part Number: FW11164
|
|
|
|
|
| |
An Early Astragal Plane by T. Yates, 8 3/16 inches long. Dark patina, early style wedge. Good+
Stock/Part Number: FW11155
|
|
|
|
|
| |
A Panel Plane by A. Wheaton, Philad'a. Amos Wheaton was an early Philadelphia, PA. planemaker. He was listed in the 1793 and 1796 directories. He is rated three stars for rarity in American Wooden Planes. Three stars denotes very rare, only between 50 and 100 known examples. Good+
Stock/Part Number: FW11272
|
|
|
|
|
| |
A Pair of Side Rebate Planes by Preston, used for trimming up the sides of rebates or grooves. Ready to use in Good++ condition.
Stock/Part Number: FW10360
|
|
|
|
|
| |
A Complex Molding Plane, Ogee and Bevel. Marked A. L. Chapman in the wood, probably an owners name. Good++
Stock/Part Number: FW10662
|
|
|
|
|
| |
A Complex Molding Plane by Wm. Marples, Hibernia. C1900. 1 1/4 inch Quirk Ovolo. Crispy condition. Good++
Stock/Part Number: FW10080
|
|
|
|
|
| |
A Very Unusual Handled Sash Scribe Molding Plane by James Panton, Aberdeen, Scotland. 1882 to 1908. Until 1895 Panton was described as a planemaker. After that time, he is described as a tool merchant. This plane is in FINE condition.
Stock/Part Number: FW11320
|
|
|
|
|
| |
A 7/8 inch Bead Plane by Buck. Good+
Stock/Part Number: FW11389
|
|
|
|
|
| |
A 3/4 inch Ovolo Plane by Tyzac & Son. Good++
Stock/Part Number: FW11393
|
|
|
|
|
| |
A Lying Ogee with Bevel, Complex Molding Plane by Cox & Luckman, Birmingham. Good++
Stock/Part Number: FW11390
|
|
|
|
|
| |
A Quirk Ogee with Bead Molding Plane, marked No 4 by Joseph Gleave, Bolton. Good++
Stock/Part Number: FW11361
|
|
|
|
|
| |
A Complex Molding Plane by Watsons, Leeds, early 1800s. A Flute, Quirk & Fillet profile. Good
Stock/Part Number: FW11428
|
|
|
|
|
| |
A Boxed Quirk & Fillet by King and Prague, Hull. marked No 6 on the heel. Good+
Stock/Part Number: FW11365
|
|
|
|
|
| |
An Ogee and Bevel by King & Peach, Hull, 1848 to 1864. Good++
Stock/Part Number: FW11449
|
|
|
|
|
| |
A 5/8 inch Cove and Ogee by Wm Moss, 1812 to 1844. Good+
Stock/Part Number: FW11450
|
|
|
|
|
| |
A 6/8 inch Cove & Bevel by O'Kines, C1825. Good+
Stock/Part Number: FW11452
|
|
|
|
|
| |
A Quirk, Ogee & Bevel Molding Plane by Mockridge & Francis, Newark, NJ. The cutting iron is by Butcher. Very nice condition. Good++
Stock/Part Number: FW11640
|
|
|
|
|
| |
A Simple Gothic Bead, 3/8 inch, fully boxed. Unmarked. Good++
Stock/Part Number: FW11658
|
|
|
|
|
| |
A Miniature Boxwood Tailed Rebate Plane by Albert Keating. Used for instrument making. Fine condition.
Stock/Part Number: FW11727
|
|
|
|
|
| |
A Quirk Ovolo and Bead Complex Molding Plane by Varvill, York. Good++ $68.00
Stock/Part Number: *
|
|
|
|
|
| |
An Unused Twin Iron Nosing Plane by Sargent & Co. No 633. Fine $54.00
Stock/Part Number: *
|
|
|
|
|
| |
A Rosewood Shave with brass front. 2 inch edge. Good+
Stock/Part Number: FW12215
|
|
|
|
|
| |
A Rosewood Spoke Shave with brass wear plate and adjusting nuts. 2 1/2 inch cutting edge. Good++
Stock/Part Number: FW12214
|
|
|
|
 "Boxwood Block Plane with Moulson Brothers Iron")
 "Rosewood Tool Handle by Springfield Tool & Level Co")
 "Handled Compass Rabbit Plane by C. Nurse")
 "Walnut Stair Saw")
 "Boxwood Handled Screw Stem Plow Plane by Casey, Clark & Co")
 "Fully Boxed Wedge Stem Sash Fillester by Edwards, Bays and Rye, Swindon")
 "Set of 18 Hollow & Rounds by Rowell & Gibson, Albany, NY")
 "1/2 inch Round by Christopher Gabriel")
 "1/4 Inch Bead Plane by Carter")
 "Table Joint Plane by Christopher Gabriel")
 "Sheffield Plated Brace")
 "Twin Iron Complex Molding Plane by Mathieson")
 "Complex Molding Plane by Gleave")
 "Twin iron Complex Molding Plane by Miller")
 "Handled Screw Stem Plow Plane")
 "3/16 inch Beading Plane by Holden")
 "Table Joint Planes by C. R. Wells")
 "3/8 inch Boxed Center Beading Plane by William Ward")
 "Complex Molding Plane, Quirk, Ogee with Bevel by Biddle & Co./A. E. Baldwin")
 "Complex Molding Plane, Quirk, Ogee with Bevel by E. W. Pennell")
 "Complex Molding Plane by J Dryburgh")
 "18th Century Yellow Birch Bead Plane by Joe Fuller")
 "Rare manufactured Spill Plane by Kirk & Asling")
 "Quirk, Ogee and Bevel Complex Molding Plane by Brown and Barnard")
 "Quirk, Ogee and Bevel Complex Molding Plane by Gough and Bowen")
 "Coachmaker's Compass Hollow Plane")
 "4 inch Compass Rebate Plane")
 "Pair of 7/8 inch Boxed Beading Planes by Griffiths")
 "Coachmaker's Compass Quarter Round Plane")
 "Planking Plane by Greenfield Tool Co")
 "Beech Handled Pad Saw")
 "5/8 inch Boxed Beading Plane by Griffiths")
 "3/8 inch Grooving Plane by Arthur")
 "Complex Molding Plane by Varvill & Sons, York. Quirk Ogee with bevel")
 "5/8 inch Bead Plane by D. Malloch & Son")
 "5/8 inch Beading Plane by Edward Preston")
 "Beech Bow Saw by S. Tyzack & Son")
 "Ogee Shaped Stair Rail Shave")
 "Ogee Molding Plane by A. Mathieson, Glasgow")
 "Complex Molding Plane by J. Wood")
 "Early Astragal Plane by T. Yates")
 "Panel Plane by A. Wheaton, Philad'a")
 "Pair of Side Rebate Planes by Preston")
 "Complex Molding Plane, Ogee and Bevel")
 "Complex Molding Plane by Wm. Marples, Hibernia, 1 1/4 Quirk Ovolo")
 "Unusual Handled Sash Scribe Molding Plane by James Panton, Aberdeen, Scotland")
 "7/8 inch Bead Plane by Buck")
 "3/4 inch Ovolo Plane by Tyzac & Son")
 "Lying Ogee with Bevel, Complex Molding Plane by Cox & Luckman")
 "Quirk Ogee with Bead Molding Plane, marked No 4 by Joseph Gleave")
 "Complex Molding Plane by Watsons, Leeds")
 "Boxed Quirk & Fillet by King and Prague, Hull")
 "Ogee and Bevel by King & Peach")
 "5/8 inch Cove and Ogee by Wm Moss")
 "Cove & Bevel by O'Kines")
 "Quirk, Ogee & Bevel Molding Plane by Mockridge & Francis")
 "Simple Gothic Bead, 3/8 inch")
 "Miniature Boxwood Tailed Rebate Plane by Albert Keating")
 "Quirk Ovolo and Bead Complex Molding Plane by Varvill")
 "Unused Twin Iron Nosing Plane by Sargent & Co. No 633.")
 "Rosewood Shave with brass front")
 "Rosewood Spoke Shave with brass wear plate")
