Tools
|
 |
 A
14 inch Brass Back Saw by Robt. Sorby, Sheffield. Kangaroo
Trade Mark. Nice early "split style" brass screws.
Minor flakes on tote. Good+ $98.00 |
FW11126
|
 |
A Boxwood Handles Pad Saw with brass fittings. Nice patina, good saw. The brass fittings have some very fine knurling. Overall a pretty saw in Good++ condition. $54.00 |
FW11144
|
 |
A 1/2 inch Lock Mortice Chisel by W. Marples & Sons, Sheffield. Good++ $125.00 |
FW11265
|
 |
An Adjustable Hollow Auger by E. C. Stearns & Co. Syracuse, NY. Original finish is chipped and worn, but all working parts are in excellent condition with plenty of life left for lots more work. Good+ $88.00 |
FW11252
|
 |
A Sash Makers Scribing Chisel by T. Turner, Sheffield. One of the more rare sash makers tools in really nice condition. Good++ $98.00 |
FW11208
|
 |
A Sash Makers Chisel and Dowel Bit by Wm. Marples & Sons. Sheffield. A pair of great tools for thewindow maker. Good++ $108.00 |
FW11205
|
 |
A great Slaters Hammer by Auld & Conger, Cleveland, Ohio. Good+ $125.00 |
FW11084
|
 |
A Wimble Brace No 12W by Fray & Co. Bridgeport, Ct. Nice rosewood handles. Good++ $168.00 |
FW11191
|
 |
A Set of 15 Assorted makers long bits by Greenlee, Snell & Vanguard plus 2 short bits. All in a fitted cherry case with a Millers Falls Adjustable Ratchet Handle. Sizes of bits vary from 1 1/4 inches to 1/4", all in good condition. The top draw has had a minor repair to the front. Good++ $375.00 |
FW11099
|
 |
A Pair of Paring Chisels by The James Swan Co. 2inches and 1 3/4 inches wide. Unused, will need honing and handles. Good ++ $160.00 |
FW11105
|
 |
A super Millers Falls Breast Drill No 120B. Most original finish remains. A great working tool. Good++ $88.00 |
FW11102
|
 |
A Shoulder Rabbet Plane by E. Preston & Sons. 1 1/4 inches wide. A great "User" plane. Lots of the original iron left for use. Nickel plated finish is worn. Good+ $398.00 |
FW10972
|
 |
A primitive Froe, 10 1/2 inch cutting edge. Good+ $88.00 |
FW10036
|
 |
Set of 13 St. Ives, Mesphisto Bits. by the W A Ives Mfg. Co., Wallingford, Conn. Still in the original cloth roll. Good+ $115.00 |
FW10989
|
 |
A 10 inch Brass Back Saw by Melhuish, Fetter Lane, Holborn, E.C. (London). A nice open handle attached with split brass pins. Resharpened and ready to use. Some staining and marks on the straight saw. Good+ $145.00 |
FW10711
|
 |
A pretty Rosewood Shave. Good+ $45.00 |
FW8613
|
 |
Yankee Screwdriver No 135, by North Bros. Div. of Stanley Tools. This one has the rarely found, flared chuck ferrule. Good++ $54.00 |
FW10851
|
 |
An E. Preston, Rosewood stuffed Handled Smoothing Plane. Parallel sides, Adkins iron. Plane is Good++, iron has pitting and 1/2" remaining. $395.00 |
FW8719
|
 |
A 10" Steel Back Cross Cut Saw by Tyzack & Turner, Sheffield. No 13. A great "User" saw. Re-sharpened and ready to go! Good++ $68.00 |
FW10459
|
 |
An 8" Steel Back saw by Mather & Son, Sheffield. Open handle and re-sharpened. Good+ $98.00 |
FW10715
|
 |
Pair of Carving Chisels, spoon shaped gouges. Good+ $68.00 |
FW7591
|
 |
Pair of Carving Chisels by Taylor, a shallow gouge and gouge. Good++ $60.00 |
FW7999
|
 |
A super Turning Chisel by Isaac Greaves, Sheffield. 1 3/4" skew iron. New cherry handle with brass ferrule. The chisel is as new, unused, cast steel, (will need sharpening to use). A fine tool for the turner! Good++ $78.00 |
FW10765
|
 |
Low Angle Knuckle Cap Block Plane by Craftsman. Reground and ready to use. Good+ $78.00 |
FW6876
|
 |
A 1/2" Mortise Chisel by Moulson Bros. Sheffield, in Good++ condition. $68.00 |
FW10734
|
 |
A very nice 1/2" Mortise Chisel by Marsden, original handle. Good++ $68.00 |
FW10733
|
 |
A good 1/2" Mortise Chisel. Nice oval handle. Used but not abused, with plenty of iron left. Good+ $44.00 |
FW10651
|
 |
Norris A1 Panel Plane. 14 1/2" long. Beech infill stained to resemble rosewood. Original Norris iron with plenty left for years of use. Good+ $950.00 |
FW9722
|
 |
14" Brass Back Saw by H. V. Hill. Straight and resharpened - ready to use. Good+ $98.00 |
FW10442
|
