Stanley Tools Option 2

 
 

Stanley No 2 Smoothing Plane


NEW ITEM A Stanley No 2 Smoothing Plane. This is a "user" grade No 2. Used but not abused, the iron is a replacement, the original iron seen standing up in the background of the picture is very pitted. Good + $195.00
Stock/Part Number: FW12289
Price: $195.00
Quantity:  
 
 

Stanley No 4 Smoothing Plane Type 15


NEW ITEM A Stanley No 4 Smoothing Plane, Type 15. 1931 - 1932. General purpose bench plane. Rosewood handle and knob with partial original logo. The iron will need stoning and honing before use. A good "user" plane with lots of life left. Good + $94.00
Stock/Part Number: FW12287
Price: $94.00
Quantity:  
 
 

Stanley No 59 Dowelling Jig


NEW ITEM Stanley No 59 Dowelling Jig. Complete, except for 3/8 inch attachment. Good++ condition with instruction booklet. $48.00 
Stock/Part Number: FW12284
Price: $48.00
Quantity:  
 
 

Stanley No 6 C Fore Plane


 A Stanley No 6 C Fore Plane. Corrugated bottom, prefered by some when working resinous woods. A great "user" plane. Good + $135.00
Stock/Part Number: FW12277
Price: $135.00
Quantity:  
 
 

Stanley No 5, Type 16


 A Stanley No 5, Type 16, Jack Plane. The most used bench plane of all the Stanley models, good for general smoothing, and long enough to use for jointing. Good ++ $145.00
Stock/Part Number: FW12278
Price: $145.00
Quantity:  
 
 

Stanley No 5, Type 4


 A Stanley No 5, Type 4 Jack Plane. 1874-1884. Early version of the No 5, pre lateral adjustment. General purpose bench plane for the home or workshop. Good+ $145.00
Stock/Part Number: FW12279
Price: $145.00
Quantity:  
 
 

Stanley No 192 Rabbet Plane


 Stanley No 192 Rabbet Plane, adjustable depth stop, spur. 1 inch wide cutter. For cutting rabbets up to 1 inch. Good + $95.00
Stock/Part Number: FW12282
Price: $95.00
Quantity:  
 
 

Stanley No 12 Try Square 2 inch


 Stanley No 12, 2 inch metal Nickel Plated Try Square. Unusually small size, marked to measure 2 inches in 1/8th inch increments. The Stanley logo is cast into the frame, early 1900's.
Stock/Part Number: FW12273
Price: $175.00
Quantity:  
 
 

Stanley No 12 Veneer Scraper, Sweetheart vintage


A Stanley No 12 Veneer Scraper, Sweetheart vintage. 6 1/4 inches long, 2 7/8 inch cutter. Cast iron with japanned finish, rosewood handle. has the Stanley sweetheart marked iron. Used for scraping fine hard woods, veneers and fancy grained woods. Good+
Stock/Part Number: Fw11738
Price: $145.00
Quantity:  
 
 

Stanley No 21 1/2' Circular Plane


A Stanley No 21 1/2' Circular Plane black japanned 1902 to 1917. 1 3/4 inch cutter. Adjustable steel sole planes concave or convex surfaces. Marked No 20 1/2 on the adjustment wheel. Identical to the No 20 except has japanned finish. Good++
Stock/Part Number: FW12185
Price: $220.00
Quantity:  
 
 

Stanley No 101 Block Plane,


A Stanley No 101 Block Plane, early 1900's. 3 1/2 inches long, 1 inch cutter. Cast iron, japanned finish, worn. Handy for restricted areas and small projects, also for instrument and miniature work. Good
Stock/Part Number: FW12138
Price: $40.00
Quantity:  
 
 

Triplet Adjustable Wrench.


An Triplet Adjustable Wrench. Combination plain,alligator and tap wrench. 5 1/2 inches long. This example is marked with both TRIPLET and the Aug 19, 1913 Patent date. Good+
Stock/Part Number: FW12135
Price: $135.00
Quantity:  
 
 

Stanley No 95 Butt Gauge


A Stanley No 95 Butt Gauge. Nickel plated cast iron, used for marking rabbet jams, thickness of butts, mortises and marking, plus for squaring the edge of a butt hinge. Fine.
Stock/Part Number: FW12013
Price: $42.00
Quantity:  
 
 

Stanley No 3 Smoothing Plane, Type 16


A Stanley No 3 Smoothing Plane, Type 16, 1933 - 1944. Japanned finish with figured rosewood handle and knob. Good++
Stock/Part Number: FW11995
Price: $120.00
Quantity:  
 
 

Stanley No 4 1/2, Type 19


A Stanley No 4 1/2, Type 19 (C1950) Smoothing Plane. 10 inches long, 2 3/8 inch cutter. In original box. Crispy and clean. Good++ to FINE.
Stock/Part Number: FW11990
Price: $290.00
Quantity:  
 
 

Stanley No 68 - 135 (135A) Yankee Push Drill


A Stanley No 68 - 135 (135A) Yankee Archemedian Push Drill, with 2 bits. A later model made in the USA around 1950 with molded plastic handle. Good ++
Stock/Part Number: FW11856
Price: $38.00
Quantity:  
 
 

Stanley No 103A Yankee Archemedian Screwdriver


A Stanley No 103A Yankee Archemedian Screwdriver with 2 bits. Very nice condition. Good++
Stock/Part Number: FW11854
Price: $56.00
Quantity:  
 
 

Stanley "Yankee" Archemedian Screwdriver No 135A


A Stanley "Yankee" Archemedian Screwdriver No 135A, Made in USA, with two bits. Good+
Stock/Part Number: FW11798
Price: $48.00
Quantity:  
 
Stanley No 92 Butt & Rabbet Gauge
 

Stanley No 92 Butt & Rabbet Gauge


Stanley No 92 Butt & Rabbet Gauge. For marking rabbeted door jams and also used as a mortice gauge. Good+
Stock/Part Number: FW9934
Price: $150.00
Quantity:  
 
Cutting Iron for a Stanley No 2 or 602
 

Cutting Iron for a Stanley No 2 or 602


Cutting Iron for a Stanley No 2 or 602. Greater than 1 1/2" of useable iron remaining. Some light staining otherwise Good++
Stock/Part Number: FW10912
Price: $50.00
Quantity:  
 
 

Cutting Iron for a Stanley No 3 or 603


Cutting Iron for a Stanley No 3 or 603, 5 1/4, 605 1/4. 1 3/4" wide. The iron is marked with the 1936 Stanley Logo and "PAT. 1,918,750" which is the Patent number for the kidney shaped hole lever cap. The patent was granted to Earl V. Higbee (The Stanley Works) on July 18th, 1933. The Patent number is usually stamped on the lever cap, not on the cutting iron. Good+
Stock/Part Number: FW10913
Price: $38.00
Quantity:  
 
 

Stanley Bed Rock 603, Type 5 (1911


Stanley Bed Rock 603, Type 5 (1911) with a later Type 11 (1942) cutting iron. The plane has greater than 80% of the original jappaning with excellent rosewood knob and tote. The plane sides have "34A" stamped by an owner on one side and "A3" on the other. The iron is also stamped over the logo with the number "X4E". A great workshop plane. Good+
Stock/Part Number: FW10907
Price: $298.00
Quantity:  
 
Stanley No 9 Cabinet Maker's Block Plane
 

Stanley No 9 Cabinet Maker's Block Plane


Stanley No 9 Cabinet Maker's Block Plane, complete with original Hot Dog Handle. Cast iron, 2" wide cutter, adjustable throat. Used for extra fine precision work on hardwoods. The hot dog shaped handle can be moved to either side. This plane is in Good+ condition. No cracks or damage to the rear. (As often found in these planes).
Stock/Part Number: FW10932
Price: $2,450.00
Quantity:  
 
 

Stanley No 72 Chamfer Plane


A Stanley No 72 Chamfer Plane. Rosewood handle and knob, Sweetheart iron. Adjustable front piece, manufactured 1885 to 1938. The finish shows signs of wear as you can see in the large picture, still a very useful tool. Good+
Stock/Part Number: FW8637
Price: $375.00
Quantity:  
 
 

Stanley Scraper No 81 with Rosewood base


A Stanley Scraper No 81 with Rosewood base. Very little of the original nickel finish remaining which does not detract from the usability of this great little tool. Includes the original Stanley Sweetheart iron and rosewood base. A truly excellent user. Good+
Stock/Part Number: FW8624
Price: $112.00
Quantity:  
 
 

Stanley No 97, Cabinet Maker's Edge Plane, Type 3


A Stanley No 97, Cabinet Maker's Edge Plane, Type 3 (1908 - 1921) "V" TM on cutter. 10 inches long, 2 1/4 inches wide. An extremely accurate edge rabbet plane, used to work a rabbet up to corner. Also good for bullnose work. Some very light pitting on sides and sole from condensation. No chips or breaks on the corners. Click on large picture. Good++
Stock/Part Number: FW11602
Price: $625.00
Quantity:  
 
 

Stanley No 203 Block Plane


A Stanley No 203 Block Plane, 1934 to 1941. Cast iron, japanned with rosewood knob.5 1/2 inches long, 1 3/8 inch cutter. A super plane for small general purpose work.Good++
Stock/Part Number: FW11611
Price: $98.00
Quantity:  
 
 

Stanley No 3 Iron Bench Plane, Type 15


A Stanley No 3 Iron Bench Plane, Type 15, Sweetheart vintage, 1931-32. 8 inches long, 1 3/4 inch cutter, rosewood handle and knob. Some paint splashes on the rosewood handle. Good+ +
Stock/Part Number: FW11663
Price: $115.00
Quantity:  
 
 

Stanley No 62, Low Angle Plane


A Stanley No 62, Low Angle Plane. 14 inches long, 2 inch wide cutter. Cast iron, rosewood handle and knob. Japanning approximately 85%. No chips in the throat. with its 12 degree cutter angle, this plane is used to plane cross and end grain hardwoods.Good++
Stock/Part Number: FW11686
Price: $535.00
Quantity:  
 
 

Stanley No 3 Bench Plane, Type 16


A Stanley No 3 Bench Plane, Type 16, 1933 - 1941. 8 inches long, 1 3/4 inch cutter. General purpose bench plane, great for small projects. Used in the work shop and home. Good++
Stock/Part Number: FW11716
Price: $110.00
Quantity:  
 
 

Stanley No 60 Double Cutter Spokeshave


A Stanley No 60 Double Cutter Spokeshave, with cutting irons by Union Plane Co. This shave has 1 1/2 inch wide hollow and flat cutters. A very useful tool in any workshop. Good+
Stock/Part Number: FW11753
Price: $45.00
Quantity:  
 
 

Stanley No 135B, Ratchet Screw Driver


A Stanley "Yankee" Made in England, No 135B, Ratchet Screw Driver, with two bits. Excellent condition. Fine
Stock/Part Number: FW11783
Price: $45.00
Quantity:  
 
 

Stanley No 102 Block Plane C1923 - 1935


A Stanley No 102 Block Plane C1923 - 1935, based on the Sweetheart trade mark on the cutting iron. Good++
Stock/Part Number: FW12235
Price: $44.00
Quantity:  
 
 

Stanley No 95 Edge Trim Block Plane.


A Stanley No 95 Edge Trim Block Plane. Good++
Stock/Part Number: FW12234
Price: $155.00
Quantity: