These tools have been selected with the user in mind. Most have been cleaned and are ready to use except for sharpening and a final tuning. This we leave for the user, knowing that each woodworker may use a different technique. We try to select tools only in the best condition . Although missing Japanning or paint does not detract from the overall function or use of the tool, we do try to offer planes with greater than 80% of the Japanning remaining. Please refer to the Order Information  if you are not familiar with the condition grading system used for our tools.

 

 

User tools are for the most part a repeatable, stock item so it is quite possible that the actual tool offered may already be sold. Not to worry, we will most likely have an identical tool of similar quality. If any of our tools interest you please note its stock number and review our terms , conditions and how to place an order.
 
 
Farriers Buttress

Farriers Buttress

 A Farriers Buttress, used by Farriers for for trimming horses hooves. Good+ $95.00
Stock/Part Number: FW12281
Price: $95.00 
Quantity:


Carriage Makers Router

Carriage Makers Router

 A Carriage Makers Router Draw Knife with brass fittings, curved bar. Good++ $150.00
Stock/Part Number: FW12275
Price: $150.00 
Quantity:


Bullnose Rabbet Plane

Bullnose Rabbet Plane

 A steel Bullnose Rabbet Plane 3 1/2 inches long, rosewood wedge. 1 inch Howarth iron. Good +
Stock/Part Number: FW12274
Price: $98.00 
Quantity:


Steel Back Saw 14 inch by Turtle

Steel Back Saw 14 inch by Turtle

 A Steel Back saw by Turtle, Croyden. 14 inches long, 10 tpi. This saw has been resharpened. Good++
Stock/Part Number: FW10714
Price: $98.00 
Quantity:


Pair of Brass Trammel Points

Pair of Brass Trammel Points

A Pair of Brass Trammel Points, on original mahogany beam with pencil holder. Trammels are unmarked but very similar to E. Preston. Good+
Stock/Part Number: FW6797
Price: $115.00 
Quantity:


Wood Turning Round Chisel. 5/8 inch

Wood Turning Round Chisel. 5/8 inch

Wood Turning Round Chisel. 5/8 inch wide, 18 inches long. Good+
Stock/Part Number: *
Price: $48.00 
Quantity:


Coffin Smoothing Plane by Wm. Marples

Coffin Smoothing Plane by Wm. Marples

A Coffin Smoothing Plane by Wm. Marples, Sheffield. Steel body with rosewood stuffing and brass fittings. A long and well established tool maker from from the early 1800s. Marples and his three sons produced metal planes, wooden planes and various edge tools. The business continued into the 1930s, purchasing many other tool makers businesses over the years. After this time they were also active in manufacturing tools for other trades, including cutlery and garden tools. The plane offered is in Good+ condition.
Stock/Part Number: FW12143
Price: $425.00 
Quantity:


North Brothers Manufacturing Co "Yankee"130 A, Achemedian Screwdriver

North Brothers Manufacturing Co "Yankee"130 A, Achemedian Screwdriver

A North Brothers Manufacturing Co. Phila, (Division of Stanley Tools). "Yankee"130 A, Achemedian Screwdriver. Good working order with one bit. Good+
Stock/Part Number: FW9211
Price: $35.00 
Quantity:


Greenlee Archemedian Screw Driver No 448 with 3 bits

Greenlee Archemedian Screw Driver No 448 with 3 bits

A Greenlee Archemedian Screw Driver No 448 with 3 bits. 2 bits are original, one is a replacement. The screw driver will accept Stanley/North Bros. 9/32 inch dia. bits. This one is as New in the Box.
Stock/Part Number: FW12017
Price: $88.00 
Quantity:


Millers Falls No 1324 Brace

Millers Falls No 1324 Brace

A Millers Falls No 1324 Brace with 6 inch sweep. This is the smallest sweep of the Millers Falls Braces. 98% original finish. Good++
Stock/Part Number: FW11970
Price: $155.00 
Quantity:


Norris A1 Panel Plane

Norris A1 Panel Plane

Norris A1 Panel Plane. 14 1/2" long. Beech infill stained to resemble rosewood. Original Norris iron with plenty left for years of use. Good+
Stock/Part Number: FW9722
Price: $950.00 
Quantity:


Low Angle Knuckle Cap Block Plane by Craftsman

Low Angle Knuckle Cap Block Plane by Craftsman

Low Angle Knuckle Cap Block Plane by Craftsman. Reground and ready to use. Good+
Stock/Part Number: FW6876
Price: $78.00 
Quantity:


Turning Chisel by I. Greaves

Turning Chisel by I. Greaves

A super Turning Chisel by Isaac Greaves, Sheffield. 1 3/4" skew iron. New cherry handle with brass ferrule. The chisel is as new, unused, cast steel, (will need sharpening to use). A fine tool for the turner! Good++
Stock/Part Number: FW10765
Price: $78.00 
Quantity:


Shoulder Rabbet Plane by E. Preston & Sons

Shoulder Rabbet Plane by E. Preston & Sons

A Shoulder Rabbet Plane by E. Preston & Sons. 1 1/4 inches wide. A great "User" plane. Lots of the original iron left for use. Nickel plated finish is worn. Good+
Stock/Part Number: FW10972
Price: $398.00 
Quantity:


Sargent No 5307 Knuckle Cap Block Plane

Sargent No 5307 Knuckle Cap Block Plane

A Sargent No 5307 Knuckle Cap Block Plane, with original cutting iron that includes the lateral adjustment. Some staining but no pitting. Good+
Stock/Part Number: FW11636
Price: $68.00 
Quantity:


 Millers Falls No 206 Steel Block Plane

Millers Falls No 206 Steel Block Plane

A Millers Falls No 206 Steel Block Plane. A great little user. Just 9/16 inch of the original cutting iron remains, but included is an equivalent Stanley iron with 1 1/8 inch remaining. Good+
Stock/Part Number: FW11634
Price: $40.00 
Quantity:


 North Bros. "Yankee" No 130A Ratchet Screw Driver

North Bros. "Yankee" No 130A Ratchet Screw Driver

A North Bros. "Yankee" No 130A Ratchet Screw Driver, Pat. Date, Dec. 11.23, with 1 straight bit and two Phillips bits. Good++
Stock/Part Number: FW11782
Price: $64.00 
Quantity:


Keen Kutter Corner Chisel, 1 inch

Keen Kutter Corner Chisel, 1 inch

A Keen Kutter Corner Chisel, 3/4 inch. Good++ 
Stock/Part Number: FW12193
Price: $95.00 
Quantity:


 If you find something that interests you please see our order information page. Or if you have questions on this specific User item, please send us an email.

/
/